MILLENNIUM WHITE POOL FINISHES is the new technology in pre-packaged pool plaster that produces the protection to offer a smooth, white and long lasting, durable pool finish.

MILLENNIUM WHITE POOL FINISHES is manufactured using only pure white aggregates, white cement, additives and polymers that improve handling properties and produce a finish that is resistant to etching, stains and discoloration. The new technology of the MILLENNIUM WHITE POOL FINISHES formulation produces a denser, harder and less water permeable finish that is more chemical and stain resistant.

· Clean, White or Colored Appearance

· Slip Resistant

· Stain Resistant

· Longer Life

· Etch Resistant

The effectiveness of this product depends upon its proper application and the condition and preparation of the surface to which it is applied.

MILLENNIUM POOL FINISHES should be applied over surfaces prepared as previously described or over a base cement that has cured for at least 24 hours.

PREMIX MARBLETITE MFG. Co. (hereinafter referred to as Premix) warrants its product, MILLENNIUM POOL FINISHES against failure for seven (7) years, from date of installation. See the warranty for specific conditions, remedies and exclusions.

The long term performance of MILLENNIUM POOL FINISHES will be directly proportional to the care taken during the filling process, the first ninety days of pool maintenance, and routine consistent maintenance.

1) Follow the start-up procedures as recommended by Premix Pool Products. 2) Adjust the chemicals to the following levels:

a. pH 7.4 to 7.6

b. Alkalinity 100 to 125 ppm

c. Calcium 250 to 400 ppm

d. Chlorine gradually to 2 ppm

e. Total dissolved solids <1000 ppm